1.Removal Dual Clutch:
Disassemble the double clutch fixing snap ring, install the three claws and pull out the double clutch.
2.Reinstall Reset Dual Clutch:
Resprings/re-trips the springs on the clutch so that you can reinstall it again.
3.Install Dual Clutch:
the transport fastener must be put back in place if the double clutch is used again after disassembly
4.Dual-clutch Locking Tool:
Use for dual clutch lock and unlock, clutch reinstall reset.
5.Durable and Strong:
Made of high quality steel apart from one plastic part , not easy break.
6.Suitcase Package:
all the tools put in a plastic case, easy to carry and storage.
FUNCTION:
Special designed to removal install and reinstall reset DPS6 dry dual clutch transmission.
Applicable:
For ford dual clutch transmission DPS6.
vehicle include:
Fiesta 2011-2019;
Focus 2012-2018;
Transit Connect 2019;
B-MAX since 2012
FM number:
307675.
Instructions for installing an unlock lock:
Step 1:
Insert the locked double clutch, put it into the mounting sleeve, install the extension feet on three sides to fix the proper holes, and fix the extension feet. Unscrew the screw and observe whether it is in place. When in place, remove the tool and install the retaining ring.
Step 2:
Remove the motor on both sides, use the hexagonal tool to insert the motor teeth, and rotate it counterclockwise to the end (there is a popping sound when rotating, and the double clutch slightly pops up). Turn the other side counterclockwise again. Finally install the motor. At this point, the dual clutch has been unlocked and can be loaded.
All over india
12 hours
Available
